KDP Rejection Reasons and How to Fix Them

By · Published November 17, 2026 · 6 min read

Want the finished book instead of doing it by hand?Make the whole book

Most KDP rejection reasons for a paperback come down to a short list of file problems that KDP's manual review catches after you press publish. KDP emails you what to fix, the book goes back to draft, and you upload again. This guide lists the KDP rejection reasons from KDP's own help pages (read on 17 November 2026), what each one means, and how to fix it before you upload, so the first submission goes through.

The quick checklist

Before you upload, check these, in this order:

  1. The page size is the trim size, plus bleed if you use it.
  2. Nothing sits outside the margins, including spaces and empty text boxes.
  3. All fonts are embedded.
  4. Images are at least 300 DPI at their printed size.
  5. No more than 4 blank pages in a row at the start or middle, and no more than 10 at the end.
  6. The title and author in the book match the title and author you entered in KDP.
  7. The cover is one page, at the exact size from KDP's cover calculator, with no spine text below 79 pages.

The rest of this page explains each KDP rejection reason and the fix.

Trim size and bleed

What KDP says: the page size does not match the trim size, or images that should run to the edge stop short.

Fix: set the page size to the trim size. If anything prints to the edge of the page, the whole book uses bleed: add 0.125 in to the width and 0.25 in to the height, and extend those images 0.125 in past the trim line on the top, bottom and outside edges. A book with bleed has to be uploaded as a PDF.

Margins and gutter

What KDP says: content falls outside the margins or into the gutter (the inside margin by the spine).

Fix: use mirrored margins for the whole document. The inside margin grows with the page count, from 0.375 in for up to 150 pages to 0.875 in above 700 pages, and the outside, top and bottom margins are at least 0.25 in (0.375 in with bleed). Set slightly larger margins than the minimum, because italic letters can overhang their text box.

Text boxes, spaces and hidden characters

What KDP says: text, spaces or invisible objects run past the margins.

Fix: turn on formatting marks and look for stray spaces at the ends of lines, empty text boxes and leftover art boxes. Delete them. This is one of the most common KDP rejection reasons for books made in Word, because the problem cannot be seen without the marks.

Fonts not embedded

What KDP says: the PDF has fonts that are not embedded.

Fix: when you save the PDF, choose the option to embed all fonts, and do not limit it to the characters used. If a font's licence forbids embedding, switch to another font.

Image resolution

What KDP says: images are below 300 DPI.

Fix: insert images at their original size instead of enlarging them, turn off image compression, and check the resolution: pixel width divided by printed width in inches should be 300 or more. Comics and manga with screen tones should use 600 DPI to avoid moiré patterns.

Blank pages

What KDP says: too many blank pages in a row.

Fix: no more than 4 consecutive blank pages at the start or in the middle, and no more than 10 at the end. KDP prints at least 24 pages, so a very short book cannot simply be padded with blank pages; it needs more content.

Title, author or ISBN do not match

What KDP says: the text in the book or on the cover differs from the book details you entered.

Fix: make the title, subtitle, author name and ISBN identical everywhere: title page, copyright page, cover and the KDP details form.

Leftover template text and page numbers

What KDP says: placeholder text such as "Insert text here" or "Book title" remains, or page numbers run out of order.

Fix: search the file for template phrases in headers, footers and front matter. For page numbers, insert a next-page section break after the front matter and restart the numbering at the first chapter.

Illegible text

What KDP says: text is too small, overlaps, or blends into the background.

Fix: keep all text at 7 pt or larger, inside the book and on the cover, with enough contrast against the background.

Cover problems

What KDP says: the cover has more than one page, the wrong size, white space or crop marks, elements outside the safe zone, or text on the spine of a book under 79 pages.

Fix: make the cover one page: back, spine and front together. Take the exact size from KDP's cover calculator for your trim, page count, ink and paper. Remove white edges and crop marks, keep text inside the safe zone, and remove spine text if the book has fewer than 79 pages. Flatten transparencies and layers when you export.

Most of these rejections come down to numbers you can check before you upload: the margin calculator gives the inside margin for your page count, the KDP cover calculator gives the exact cover size and spine, and KDP trim sizes lists the page range for each size. The KDP publishing checklist puts all of the checks in order.

How Book2Pub avoids these KDP rejection reasons

Book2Pub lays out every book against the same rules: the inside margin for the final page count, bleed only where pictures reach the edge, embedded fonts, 300 DPI images, a one-page cover sized from the final page count, and no spine text below 80 pages. Every interior and cover PDF runs through a print check before you can download it, and an export that would end in more than 10 blank pages is refused with a clear message instead of being sent to KDP. You still review the proof copy; the file problems on this page should not be the reason a book comes back.

Sources

Do it now

More guides

Put this guide to work

Upload a Word or Markdown manuscript and get print-ready KDP files.

Amazon, Kindle Direct Publishing and KDP are trademarks of Amazon.com, Inc. This site is not affiliated with or endorsed by Amazon. Figures follow KDP's published help pages; always confirm them in the KDP previewer before you upload.