KDP Cover Template: Exact Size and How to Use It
By Kevin Fan · Published November 15, 2026 · 5 min read
Want the finished book instead of doing it by hand?Make the whole book
A KDP cover template is a guide layer at the exact size of your paperback wrap, with the trim lines, spine, safe zones and barcode area marked. The size is not one fixed number: the cover is a single piece (back, spine and front), so its width depends on how thick the book is. This page shows how the template is built, with the formula and a worked example. To get a KDP cover template for your own book as PNG, SVG or PDF, use the free KDP cover calculator.
The formula
All measurements are in inches.
- Cover width = bleed + back cover width + spine width + front cover width + bleed
- Cover height = bleed + trim height + bleed
Bleed is 0.125 inches on each outside edge. The back and front are each as wide as the trim size. So:
- Width = (2 x trim width) + spine width + 0.25
- Height = trim height + 0.25
Spine width
Spine width = page count x the thickness of one page. The thickness depends on ink and paper:
| Ink and paper | Thickness per page |
|---|---|
| Black ink, white paper | 0.002252 in |
| Black ink, cream paper | 0.0025 in |
| Standard color, white paper | 0.002252 in |
| Premium color, white paper | 0.002347 in |
KDP prints an even number of pages. If your interior has an odd count, one blank page is added, and the spine is calculated on the even number.
A worked example
A 120-page book at 6 x 9 inches, black ink on white paper:
- Spine width = 120 x 0.002252 = 0.270 inches
- Cover width = (2 x 6) + 0.270 + 0.25 = 12.520 inches
- Cover height = 9 + 0.25 = 9.25 inches
The cover for this book is 12.520 x 9.25 inches. On cream paper the same book has a 0.300 inch spine and a 12.550 inch wide cover, which is why a cover made for one paper does not fit the other.
How to use a KDP cover template
- Finish the interior first. The page count has to be final.
- Generate the template for your trim size, page count, ink and paper.
- Place it as the bottom layer in your design tool, at 100% size and 300 pixels per inch.
- Design on layers above it: background out to the bleed edge, text inside the safe zones.
- Hide or delete the template layer, then export one PDF at the full wrap size.
What goes where on the wrap
Reading the flat cover from left to right: back cover, spine, front cover.
- Bleed. Background color and images must extend the full 0.125 inches past the trim on all four outside edges. The trimming blade is not exact, and a background that stops at the trim line can leave a white sliver.
- Safe zone. Keep titles, author name and back-cover text at least 0.125 inches inside the trim line, and more looks better.
- Barcode. KDP places a barcode on the lower right of the back cover in a white box about 2 x 1.2 inches. Leave that area free of text and important artwork.
- Spine text. KDP only allows text on the spine when the book is thick enough, around 80 pages or more, and the text needs clear space on both sides because the fold can shift slightly. Thinner books get a plain spine.
Common reasons a cover is rejected
- The file is the size of the front cover only. KDP paperbacks need the full wrap.
- The cover was sized for a different page count. Any change to the interior that adds or removes pages changes the spine and so the size of the cover.
- Text sits on or outside the trim line.
- Spine text on a book that is too thin for it.
- The image is low resolution. Use 300 pixels per inch at the final size: the example above is 3,756 x 2,775 pixels.
File format
KDP takes the paperback cover as a single PDF at the full wrap size, with fonts embedded and no crop marks. The interior is a separate PDF at the trim size (plus bleed, if the interior has images that run to the edge).
Hardcover and eBook covers are different
This page covers paperbacks. A hardcover wrap is larger because the cover board is wider than the pages and the image wraps around its edges; KDP publishes separate numbers for it. A Kindle eBook cover is just a front image with no spine or back, and KDP recommends 2,560 x 1,600 pixels.
The short way
When a book is made with the AI storybook generator or any of the other book types, the cover is built after the interior is laid out, so the page count is final before the spine is calculated. The wrap comes out at the exact size, with the title and back text inside the safe zone, the barcode area left clear, and spine text only when the book is thick enough. If you design your own cover, start from a KDP cover template made for your exact page count, and make a new one whenever the page count changes.